AVO Stage 1 Turbocharger Kit for the 2013 Subaru BRZ Now Available!

+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member MaxPerformanceAutomotive's Avatar
    Join Date
    Oct 2013

    AVO Stage 1 Turbocharger Kit for the 2013 Subaru BRZ Now Available!

    AVO's front-mounted Stage 1 turbocharger kit for the Subaru BRZ is in stock and ready to ship!

    The kit is designed to work with both RHD and LHD models in all countries, with extensive testing done on both the Japanese Subaru BRZ and the US Market Scion FR-S.

    The turbocharger kit is designed from top to bottom specifically to the BRZ and consists of all the parts necessary to bolt the kit up to the car. The kit utilizes an AVO 18/49 turbocharger that mounts up under the front of the engine via an AVO stainless steel unequal exhaust manifold, and then it bolts up to the stock exhaust with the AVO polished stainless steel turbo outlet (also referred to as a downpipe). Cooling the pressurized air is an AVO aluminum bar and plate front mount intercooler which uses black piping throughout, mechanical oil scavenging pump, oil reservoir tank, and all necessary water and oil hoses and fittings. Tuning is Ecutek tuning tools.

    The turbo kit was designed to bolt up to the stock air intake box and stock exhaust system. AVO spent a lot of time ensuring it will work with the standard fueling system for a complete bolt on and go setup. The beauty of the system is that it looks very stock from above! The FMIC has been specifically designed to fit with the standard bumper without trimming as well, and on FR-S models would be be difficult to see unless you are looking for it.

    From AVO's testing, the kit can be expected to produce anywhere from 220 to 250 whp on pump gas, dependent entirely upon the quality of the pump gas. This is due entirely to the fact that the stock motor is 12.5:1 compression, incredibly high for a n/a motor. This makes gas quality even more important than ever!

    Kit Component Specifications

    Turbo Specifications: The AVO 18/49 Turbocharger comes with a 5-7 psi actuator for precise boost control at lower psi levels, ensuring engine longevity. The turbocharger is rated for 380 hp of flow, so there is certainly headroom available with it from the base stage 1 kit.

    Mechanical Oil Pump Specifications: The AVO kit is unique because it utilizes a mechanical oil pump that located at the back of the engine and runs off the back of the RH camshaft. There is also a oil reservoir tank right off the turbocharger itself. This is the most reliable way to pull oil through the turbo to the engine, as it keeps the flow rate tied to the rpm speed of the motor, ensuring that it's properly scavenged at low RPM's and idling, and has enough at high RPM's.

    Front Mount Intercooler Specifications: AVO Bar & Plate Aluminum Intercooler with cast endtanks. Length = 19" Height = 8" Width = 3", The intercooler kit utilizes black wire- reinforced silicone piping and two black powdercoated steel piping. The intake piping has ports to mount up a variety of blow-off valves, even OEM ones for a full stealth look.

    Part Number: S6Z12GS7A003T

    MSRP: $4400.00 for the ceramic coated

    Our Price: $3700.00

    Free shipping through the 48 states.

    NOTE: The kit does NOT include the EcuTek license which must be purchased separately. If you or the end user already has an EcuTek you can get the tune from AVO Turboworld USA.

    Max Performance Automotive has the EcuTek unit and license with the base tune (Part #: S6Z12EE9A001T) available for sale separately.

    Please email or PM us if you are interested. We also have the installation instructions if you like to read through it before purchasing.

    Last edited by MaxPerformanceAutomotive; 12-13-2013 at 01:53 AM.

  2. #2
    Junior Member MaxPerformanceAutomotive's Avatar
    Join Date
    Oct 2013
    We are now offering this kit for a limited time at only $3700 dollars shipped out the door to the 48 states. Please PM or email us if interested.

+ Reply to Thread

Similar Threads

  1. BRZ and FR-S AVO Turbo kit - S6Z12GS7A003T
    By Big Time Rex STi in forum Subaru BRZ Classified Forum
    Replies: 3
    Last Post: 10-04-2013, 04:59 PM
  2. Stage 1 Front mounted Turbo by AVO's
    By Foob in forum Subaru BRZ Engine and Technical Discussion
    Replies: 31
    Last Post: 04-11-2013, 04:34 PM
  3. Full Blown Motorsports Stage 2 turbo kit for BRZ / FRS
    By TdotRacer in forum Subaru BRZ Videos
    Replies: 0
    Last Post: 03-11-2013, 05:39 PM
  4. AVO Turboworld turbo Kit for BRZ.
    By RL_BRZ in forum Subaru BRZ Engine and Technical Discussion
    Replies: 56
    Last Post: 02-12-2013, 03:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Powered by vBadvanced CMPS v4.1.0

Search Engine Friendly URLs by vBSEO 3.6.0