Subaru BRZ Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
285 Posts
Discussion Starter · #1 ·
OK, so I may have spilled a bag of M&Ms. And some of them might have fallen into the space between the seat and center console. And a few might have landed right between the seat rails.

How hard is it to remove the front passenger seat so I can remove the M&Ms?

(and no, I can't get a vacuum cleaner in there. not enough room)
 

·
Registered
Joined
·
1 Posts
It's easy as hell. Only 4 bolts...first loosen the front almost all the way but leave me on a little so u can slide the seat forward...after u slide the seat forward, lean the seat backing forward. Then completely remove the back 2 bolts. Finally remove the front 2 bolt completely and tilt the chair forward so u can unplug the connector underneathe the seat. And boom your done.


To put back the seat, just reverse those steps.
 

·
Registered
Joined
·
285 Posts
Discussion Starter · #3 ·
Thanks for the info. I haven't done it yet because I don't have a passenger very often and she never moves the seat forward/back. But it will get done before the weather warms up and the M&Ms get squishy.
 
1 - 5 of 5 Posts
Top